Preparation:

  1. Configure ControlbyWeb Relay’s network.

Follow controlbyweb relay’s manual to setup network.

Before add Integration, make sure controlbyweb relay devices is connected to Internet.

Setup Page Web Address: http://192.168.1.2/setup.html

Setup Username: admin

Setup Password: webrelay (all lower case)

And we shall be able to open controlbyweb device’s web UI.

Note: IP address may vary if you enable DHCP.

image.png

  1. take a photo or write down controlbyWeb device’s Serial number

Device Serial Number can be found on the label of device.

For example: In bellow device label,Serial number is 000CC807EA05

image.png

Add ControlbyWeb Integration

  1. Login Entrio Web Portal: portal.entrioai.com,

    Navigate to Settings —> Integration

    Click Add Device and Enter Device Serial Number, Device Serial Number can be found on the label of device.

image.png

  1. Click Generate CRT Token button and we shall see a token display, copy the token.