Power Requirements — Use a suitable 5V USB-C power adapter rated at 15W or above. Do not connect HAKO directly to a higher-voltage power source.
Indoor Use Only — HAKO is designed for indoor display. Keep it away from excessive heat, moisture, and direct sunlight.
Keep the Fan Clear — Make sure the ventilation openings and fan remain unobstructed during use.
Stacking — HAKO is designed to be stacked using the provided stacking pegs. For stability and safety, we recommend a maximum of two units high.
Care & Cleaning — Use a soft, clean microfibre cloth for the acrylic. Avoid abrasive materials, solvents and harsh cleaning products.
Handle with Care — The acrylic panels are durable, but can still scratch. Handle by the edges where possible and avoid placing them face-down on rough surfaces.
Note: The unit may run slightly warmer when operating at 100% brightness with full white lighting.
What’s in the Box
1 × Pre-Assembled Top Module
1 × 3-Piece Tool Kit (+3.0, H2.0, H1.5)
1 × Pre-Assembled Base Unit
1 × Base Sleeve
1 × Base Plate
1 × Spacer Ring
1 × Reflection Plate
1 × Base
2 × Stacking Pegs
1 × TPU Support
8 × Grub Screws
1 × 4mm Front Acrylic Panel
2 × 4mm Side Acrylic Panels
2 × 2mm Back Acrylic Panels (Clear + Black)
1 × Integrated Figure Display Stand Set (Standard + Extended)