These are Clipster’s official logo placement guidelines. They apply to every logo campaign unless a brief explicitly says otherwise. Following them ensures your content meets brand standards and can be approved without delays.
📹 Video Walkthrough → Watch this before getting started. It walks through exactly how to download, place, and use your logo file.
https://www.loom.com/share/c73d8f93d51a476d8eef7f465b89f3e9
Going forward, clipster logos will mainly be provided in GIF format. GIFs have a transparent background built in → no background removal (green screen, blue screen, etc.) required on your end.
We also now provide a downloadable template file (1080×1920) with the logo already placed in the pre-approved position. As long as your project file in After Effects, CapCut, or your editing software of choice is set to 1080×1920, the logo will automatically sit in the correct approved position.
How to get started:
Below are examples of ideal logo placement. If you use the provided 1080×1920 template file, the logo will be pre-placed in this exact position automatically — no manual placement needed.
snaptik_7587107240876805393_v2.mp4
The below page aims to transparently show how we review posts internally, and to guide you as a creator towards getting only approved posts! Reading below page process will ensure you never fail with logo placement & sizing!
This is a tool you can import to any project in 1080x1920 to check if your logo is placed on the red “no-go” zone. Anything more than a 25% overlap will most likely get rejected.