**1.Power supply design**

Untitled

Untitled

Untitled

3 possible supply interfaces(out one still need make sure),using Socket board can supply raspberry install window area

Untitled

2.Connection

Other pins of Pi don’t need to be used. Just need to insert the ribbon cable into the CSI connector interface

Untitled

Untitled

Untitled

3.Specification of Raspberry PI

1.a 64bit quad-core processor having cortex-A72 (ARM v8) clocked @1.5GHz

2.Includes Broadcom BCM2711 VC6 GPU able to handle two 4kp30 displays also it can handle H.265 decoding at 4kp60. It has two micro HDMI ports.

3.Pi board comes in 2GB, 4GB, and 8GB LPDDR-4 RAM options

  1. It has a dual-band 2.4/5.0 GHz Wi-Fi, Bluetooth 5.0, Gigabit Ethernet Port, 2 USB 3.0, and 2 USB 2.0 ports.

5.USB type C power input port. Also, it has POE capability via separate POE HAT (add-on).

  1. It has a standard 40 pin GPIO header (having backward compatibility)

Untitled

Untitled

https://www.hackatronic.com/raspberry-pi-4-specifications-pin-diagram-and-description/

4.Specification of Camera(15 Pin)