Install the arduino IDE

1. Install the Board Package:

• Open the Arduino IDE.
• Navigate to Tools > Board > Board Manager.
• In the search bar, type "Nicla Vision" and install the Arduino Mbed OS Nicla Boards package.

2. Configure the Board:

• Go to Tools > Board > Arduino Mbed OS Nicla Boards and select Arduino Nicla Vision from the list.
• Select the correct port under Tools > Port. It will typically be labelled with the board's name.

If port number does not show in the IDE , double click the button on the board , led shows two nodes

• Pulsating Green
• Red

Pulsating green showed the port number in the IDE

To test the board with an example File > Examples > 01.Basics > Blink.

Note that Nicla is a active low system , so when passed high , it gives low output

Tested every micro usb cable , 1 turned out faulty

• Data not transferred as intended
• Arduino Nicla Vision heats up